For those who have a garage door, repair a malfunctioning garage door is a common thing. If you have a car, you will have to keep your garage door in good working position to secure your vehicle. Furthermore, you may run with a short budget and don’t want to call a professional technician to handle the minor problems. The following are valuable tips and tricks that can help you in conducting minor repairs.
Garage door metal tracks
Inspect the tracks carefully to determine their alignment. If they are not leveled properly, you will have to unscrew the bracket, move the track slightly to align them, and then tighten up the brackets. Make sure that tracks are of the same height and diameter because a sagging garage door cannot lift the heavyweight of the garage door. If the tracks are seriously dented or damaged, you should replace them quickly.
Wash the garage door to remove the dust
Wash the garage door regularly to remove any accumulated dust, dirt, and grease from garage door tracks. Garage door tracks and rollers should be free of any dust particles and hardened grease. Check them thoroughly to wash and clean them to keep them functional in the long run.
Lubricate the garage door moving parts
Garage door rollers and tracks work efficiently if they are cleaned and lubricated on a regular basis. For this purpose, you can use WD-40 or any other lubrication spray to do this. Pour a few drops of lubricating oil, wait for few seconds to be adjusted, and clean the excess oil with the help of cotton cloth. Lubrication will not only help the garage door to move smoothly but also increase the lifespan.
Check the hardware
The brackets should be tightened at all times. Inspect the hinges and panels thoroughly to make sure that there are no loose parts like screws, nuts, and bolts. If you find any loose area, you will have to adjust them with the help of a screwdriver. Furthermore, damaged and sagging garage door hinges can be replaced immediately.
Garage door springs
Garage door springs should be hooked into their appropriate notches. If you find loose springs, remove the hook and adjust them to the next hole or notch to give the required tension. If your garage door is using a cable, use it to adjust the stress. You just need to pull the garage door cable through the sturdy plate. Once done, you will have to reverse these steps. In case, if garage door spring eventually breaks down, it will be replaced immediately. Stay away from attempting garage door spring replacement on your own because it can be dangerous. It is wise to let it to the professional.
Always stay safe
If your garage door looks messy or damaged, don’t make the mistake of conducting DIY garage door repair. Definitely, you will want to know, why I should not perform DIY garage door repair work. The answer is that the damaged garage door is very challenging and dangerous to handle. You may end up with serious injuries and damaged property. If you are not sure how to deal with the damaged garage door, you should call a professional garage door repair company as soon as problems happen.
There are some simple but effective tips to follow if you want to fix your malfunctioned garage door on your own. As I mentioned earlier, simple garage door problems do not need the help of professionals but the major issues always need the assistance of experts. In simple words, contact a professional garage door company if the problems of a garage door are beyond your abilities.